Setting the equalizer (EQ7)

You can select an equalizer curve for 7 music types (XPLOD, VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM and OFF (equalizer OFF)).

You can store a different equalizer setting for each source.

Selecting the equalizer curve

1 Press (SOURCE) to select a source (Radio, CD, MD or AUX).

2 Press (EQ7) repeatedly to select the desired equalizer curve.

Each time you press (EQ7), the item changes.

To cancel the equalizing effect, select “OFF.”

(With the card remote commander)

Adjusting the equalizer curve

You can store and adjust the equalizer settings for different tone ranges.

1 Press (MENU).

2 Press (DISC/PRESET) (+) or (DISC/PRESET) (–) repeatedly until “EQ7 TUNE” appears, then press (ENTER).

3 Press (SEEK) (+) or (SEEK) (–) to select the desired equalizer curve, then press (ENTER).

Each time you press (SEEK) (+) or (SEEK) (–), the item changes.

4 Select the desired frequency and level.

1Press (SEEK) (+) or (SEEK) (–) to select the desired frequency.

Each time you press (SEEK) (+) or (SEEK) (–), the frequency changes.

62 Hz y 157 Hz y 396 Hz y 1 kHz

y2.5 kHz y 6.3 kHz y 16 kHz

2Press (DISC/PRESET) (+) or

(DISC/PRESET) (–) to adjust the desired volume level.

The volume level is adjustable by 1 dB steps from –10 dB to +10 dB.

To restore the factory-set equalizer curve, press (ENTER) for 2 seconds.

5 Press (MENU) twice.

When the effect setting is complete, the display returns to normal play mode.

22