RM (Rotary Commander)
To change the operative direction of the rotary commander controls.
–“NORM” (z): to use the rotary commander in the
–“REV”: when you mount the rotary commander on the right side of the steering column.
To turn the AUX source display “ON” (z) or “OFF” (page 13).
DSPL (Display)
CLOCK (Clock Information)
To display the clock and the display mode at the same time.
–“ON”: to display at the same time.
–“OFF” (z): to not display at the same time.
DIM (Dimmer)
To change the brightness of the display.
–“AT” (z): to dim the display automatically when you turn lights on.
–“ON”: to dim the display.
–“OFF”: to deactivate the dimmer.
DEMO*1 (Demonstration)
To set “ON” (z) or “OFF” (page 4).
CONTRAST
To adjust the contrast of the display.
The contrast level is adjustable in 5 steps.
M.DSPL*2 (Motion Display)
To select the Motion Display mode.
–“SA” (z): to show moving patterns and spectrum analyzer.
–“ON”: to show moving patterns.
–“OFF”: to deactivate the Motion Display.
A.SCRL (Auto Scroll)
To scroll long displayed item automatically when the disc/group/track is changed.
–“ON”: to scroll.
–“OFF” (z): to not scroll.
P/M (Play Mode)
LOCAL (Local seek mode)
–“ON”: to only tune into stations with stronger signals.
–“OFF” (z): to tune normal reception.
MONO (Monaural mode)
To improve poor FM reception, select monaural reception mode.
–“ON”: to hear stereo broadcasts in monaural.
–“OFF” (z): to hear stereo broadcast in stereo.
IF AUTO/WIDE
–“AUTO” (z): to narrow automatically the reception frequency to eliminate noise.
–“WIDE”*3: to always hear FM stereo broadcasts in stereo and with full the frequency signal reception.
SND (Sound)
EQ7 TUNE (page 9)
HPF (High Pass Filter)
To select the
LPF*2 (Low Pass Filter)
To select the
LOUD (Loudness)
To enhance bass and treble at lower volume.
–“ON”: to reinforce bass and treble.
–“OFF” (z): to not reinforce bass and treble.
AUX LVL (AUX Level)
To adjust the volume level for each connected auxiliary equipment. This setting negates the need to adjust the volume level between sources.
EDIT
NAMEEDIT (Name Edit) (page 10)
NAME DEL (Name Delete) (page 10)
BTM (page 8)
*1 When the unit is turned off.
*2 When the unit is turned on.
*3 In such cases, some FM stereo broadcasts may become monaural while in the stereo reception mode.
Using optional equipment
CD/MD changer
Selecting the changer
1Press (SOURCE) repeatedly until “CD” or “MD” appears.
2Press (MODE) repeatedly until the desired changer appears.
Unit number Disc number
Playback starts.
continue to next page t
11