Receiving a station through a list

— list-up

You can list up the frequency or the name. For details on labeling a station, see page 10.

1Select the band, then press (LIST).

The frequency or station name appears.

2Press (GP/PRESET) +/– repeatedly until the desired station appears.

3Press (ENTER) to receive the station.

Other functions

Changing the sound settings

Adjusting the sound characteristics

— BAS/TRE/BAL/FAD/SUB

You can adjust the bass, treble, balance, fader and subwoofer volume.

1Press (SOUND) repeatedly to select the desired item.

The item changes as follows:

BAS (bass) t TRE (treble) t

BAL (left-right) t FAD (front-rear) t SUB (subwoofer volume)*

*“ATT” is displayed at the lowest setting, and can be adjusted up to 20 steps.

2Rotate the volume control dial repeatedly to adjust the selected item.

After 3 seconds, the setting is complete and the display returns to normal play/reception mode.

Note

Adjust within 3 seconds of selecting the item.

With the card remote commander

In step 2, to adjust the selected item, press < or ,.

Adjusting the equalizer curve

— EQ7 TUNE

You can adjust and store the equalizer settings for different tone ranges.

1Select a source, then press (MENU).

2Press (GP/PRESET) +/– repeatedly until “EQ7 TUNE” appears, then press

(ENTER).

3Press (SEEK) –/+ repeatedly to select the desired equalizer type, then press

(ENTER).

4Press (SEEK) –/+ repeatedly to select the desired frequency.

The frequency changes as follows:

62 y 157 y 396 y 1K y 2.5K y 6.3K y 16K

5Press (GP/PRESET) –/+ repeatedly to adjust the desired volume level.

The volume level is adjustable in 1 dB steps, from –10 dB to +10 dB.

continue to next page t

9