Skipping groups and discs

1During playback, press (GP/PRESET) +/–.

To skip

Press (GP/PRESET)

group

and release (hold for a

 

moment).

 

 

group

within 2 seconds of first

continuously

releasing.

 

 

discs

repeatedly.

 

 

discs

then, press again within 2

continuously

seconds and hold.

 

 

Repeat and shuffle play

1During playback, press (1) (REP) or (2) (SHUF) repeatedly until the desired setting appears.

Select

To play

REP-DISC*1

disc repeatedly.

 

 

SHUF-

tracks in the changer in random

CHGR*1

order.

 

 

SHUF-ALL*2

tracks in all units in random

 

order.

 

 

*1 When one or more CD/MD changers are connected.

*2 When one or more CD changers, or two or more MD changers are connected.

To return to normal play mode, select “REP- OFF” or “SHUF-OFF.”

Tip

“SHUF-ALL” will not shuffle tracks between CD units and MD changers.

Locating a disc by name — list-up

You can select a disc from the list when connecting a CD changer with the CUSTOM FILE function or an MD changer.

If you assign a name to a disc, the name appears on the list. For details on labeling a disc, see page 10.

1During playback, press (LIST).

The disc number or disc name appears.

2Press (GP/PRESET) +/– repeatedly until the desired disc appears.

3Press (ENTER) to play the disc.

Rotary commander RM-X4SAttaching the label

Attach the indication label depending on how you mount the rotary commander.

SOUND

DSPL

MODE

MODE

DSPL

SOUND

Location of controls

The corresponding buttons on the rotary commander control the same functions as those on this unit.

ATT

 

SOUND

 

PRESET/

 

DISC

MODE

 

SOURCE

 

DSPL

OFF

 

VOL SEEK/AMS

OFF

The following controls on the rotary commander require a different operation from the unit.

PRESET/DISC control

To control radio/CD, the same as (GP/PRESET) +/– on the unit (push in and rotate).

VOL (volume) control

The same as the volume control dial on the unit (rotate).

SEEK/AMS control

To control radio/CD, the same as (SEEK) –/+ on the unit (rotate, or rotate and hold).

Changing the operative direction

The operative direction of the controls is factory- set as shown below.

To increase

To decrease

If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.

12