Beep

To set “on” (z) or “off.”

RM (Rotary Commander)

To change the operative direction of the rotary commander controls.

–“Normal” (z): to use the rotary commander in the factory-set position.

–“Reverse”: when you mount the rotary commander on the right side of the steering column.

AUX-A(AUX Audio)*1

To turn the AUX source display “on” (z) or “off” (page 14).

Display

Clock (Clock Information)

To display the clock and the display items/image at the same time.

–“on”: to display at the same time.

–“off” (z): to not display at the same time.

A.Image (Auto Image)

Auto Image mode automatically steps (every 10 seconds) through the display images of all display images.

–“off” (z): to not change the image automatically.

–“ALL”: to step repeatedly through the display images in all display modes.

–“SA”: to step repeatedly through the display images of Spectrum analyzer.

–“Movie”: to step repeatedly through the display images of Movie mode.

INFO (Display Information)

To display the items (depending on the source, etc.) at the bottom of the display while a image is displayed.

–“on” (z): to display the items.

–“off”: to not display any items.

Dimmer

To change the brightness of the display.

–“Auto” (z): to dim the display automatically when you turn lights on.

–“on”: to dim the display.

–“off”: to deactivate the dimmer.

Demo*1 (Demonstration)

To set “on” (z) or “off” (page 4).

A.Scroll (Auto Scroll)

To scroll long displayed item automatically when the disc/group/track is changed.

–“on”: to scroll.

–“off” (z): to not scroll.

Receive Mode

Local (Local seek mode)

–“on”: to only tune into stations with stronger signals.

–“off” (z): to tune normal reception.

Mono (Monaural mode)

To improve poor FM reception, select monaural reception mode.

–“on”: to hear stereo broadcasts in monaural.

–“off” (z): to hear stereo broadcast in stereo.

Regional*2

To set “on” (z) or “off” (page 10).

Sound

EQ7 Tune (page 11)

HPF (High Pass Filter)

To select the front/rear speaker cut-off frequency: “off,” (z) “78Hz” or “125Hz.”

LPF (Low Pass Filter)

To select the subwoofer cut-off frequency: “off,” (z) “125Hz” or “78Hz.”

Loudness

To enhance bass and treble at lower volume.

–“on”: to reinforce bass and treble.

–“off” (z): to not reinforce bass and treble.

AUX Level

To adjust the volume level for each connected auxiliary equipment. This setting negates the need to adjust the volume level between sources.

Edit

Name Edit (page 13)

Name Delete (page 13)

BTM (page 8)

*1 When the unit is turned off.

*2 When FM is received.

Using optional equipmentCD/MD changerSelecting the changer

1Press (SOURCE) repeatedly until “CD” or “MD” appears.

2Press (MODE) repeatedly until the desired changer appears.

Unit number Disc number

Playback starts.

12