You can list up the frequency.
(With the card remote commander)
1Select the band, then press (LIST).
The frequency appears.
2Press M or m repeatedly until the desired station appears.
3Press (ENTER) to receive the station.
RDS
OverviewFM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio programme signal.
Display items
A B C
This unit automatically provides RDS services as follows:
AF (Alternative Frequencies)
Selects and retunes the station with the strongest signal in a network. By using this function, you can continuously listen to the same programme during a
TA (Traffic Announcement)/TP (Traffic Programme)
Provides current traffic information/ programmes. Any information/programme received, will interrupt the currently selected source.
PTY (Programme Types)
Displays the currently received programme type. Also searches your selected programme type.
CT (Clock Time)
The CT data from the RDS transmission sets the clock.
Notes
•Depending on the country/region, not all RDS functions may be available.
•RDS will not work if the signal strength is too weak, or if the station you are tuned to is not transmitting RDS data.
DE
ARadio band, Function B TA/TP*1
C Clock*2
D Preset number
E Frequency*3 (Station name), RDS data
*1 “TA” flashes during traffic information. “TP” lights up while such a station is received.
*2 When clock mode is set to “on” (page 12).
*3 While receiving the RDS station, “ *” is displayed on the left of the frequency indication.
To change display items E, press (DSPL) on the card remote commander.
1Press (AF/TA) repeatedly until the desired setting appears.
Select | To |
AF on | activate AF and deactivate TA. |
|
|
TA on | activate TA and deactivate AF. |
|
|
AF TA on | activate both AF and TA. |
|
|
AF TA off | deactivate both AF and TA. |
|
|
You can preset RDS stations along with the AF/ TA setting. If you use the BTM function, only RDS stations are stored with the same AF/TA setting.
If you preset manually, you can preset both RDS and
1Set AF/TA, then store the station with BTM or manually.
continue to next page t
9