Stored stations and correct time are erased. The fuse has blown.

Makes noise when the position of the ignition is switched.

The leads are not matched correctly with the car’s accessory power connector.

During playback or reception, demonstration mode starts.

If no operation is performed for 5 minutes with “DEMO-ON” set, demonstration mode starts.

tSet “DEMO-OFF” (page 9).

The display disappears from/does not appear in the display window.

•The dimmer is set “DIM-ON” (page 9).

•The display disappears if you press and hold (OFF). t Press and hold (OFF) on the unit until the

display appears.

•The connectors are dirty (page 14).

The Auto Off function does not operate.

The unit is turned on. The Auto Off function activates after turning off the unit.

tTurn off the unit.

Card remote commander operation is not possible.*1

Make sure the insulation film has been removed (page 5).

CD/MD playback

The disc cannot be loaded.

•Another disc is already loaded.

•The disc has been forcibly inserted upside down or in the wrong way.

The disc does not playback.

•Defective or dirty disc.

•The CD-Rs/CD-RWs are not for audio use (page 12).

MP3/WMA files cannot be played back.*2

The disc is incompatible with the MP3/WMA format and version (page 13).

MP3/WMA files take longer to play back than others.*2

The following discs take a longer time to start playback.

–a disc recorded with a complicated tree structure.

–a disc recorded in Multi Session.

–a disc to which data can be added.

The display items do not scroll.

•For discs with very many characters, those may not scroll.

•“A.SCRL” is set to “OFF”.

tSet “A.SCRL-ON” (page 10).

tPress and hold (DSPL) (SCRL).*2

The sound skips.

• Installation is not correct.

tInstall the unit at an angle of less than 45° in a sturdy part of the car.

•Defective or dirty disc.

The operation buttons do not function.*1

The disc will not eject.

Press the RESET button (page 5).*1

Press Z (eject) (page 6).*3

Radio reception

The stations cannot be received.

The sound is hampered by noises.

•Connect a power antenna (aerial) control lead (blue) or accessory power supply lead (red) to the power supply lead of a car’s antenna (aerial) booster (only when your car has built-in FM/AM antenna (aerial) in the rear/side glass).

•Check the connection of the car antenna (aerial).

•The auto antenna (aerial) will not go up.

tCheck the connection of the power antenna (aerial) control lead.

•Check the frequency.

Preset tuning is not possible.

•Store the correct frequency in the memory.

•The broadcast signal is too weak.

Automatic tuning is not possible.

•Setting of the local seek mode is not correct. t Tuning stops too frequently:

Set “LOCAL-ON” (page 10). t Tuning does not stop at a station:

Set “MONO-ON” (page 10).

•The broadcast signal is too weak.

tPerform manual tuning.

During FM reception, the “ST” indication flashes.

•Tune in the frequency accurately.

•The broadcast signal is too weak. t Set “MONO-ON” (page 10).

An FM program broadcast in stereo is heard in monaural.

The unit is in monaural reception mode.

tSet “MONO-OFF” (page 10).

*1 CDX-GT320/GT32W only

*2 CDX-GT320/GT32W/GT220/GT22W only

*3 CDX-GT220/GT22W/GT120 only

Error displays/Messages

BLANK (CDX-GT320/GT32W only) Tracks have not been recorded on the MD.*1

tPlay an MD with recorded tracks.

ERROR*2

•The disc is dirty or inserted upside down.*1 t Clean or insert the disc correctly.

•A blank disc has been inserted.

•The disc cannot play due to a problem. t Insert another disc.

16