JDSPL (display)/SCRL (scroll) button (CDX-GT320/GT32W/GT220/GT22W) page 8

To change display items (press); scroll the display item (press and hold).

DSPL (display) button (CDX-GT120) page 8

To change display items.

KSEEK –/+ buttons

CD:

To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fast- forward a track (press and hold).

Radio:

To tune in stations automatically (press); find a station manually (press and hold).

LMODE button page 8

To select the radio band (FM/AM)*.

MBTM/CAT button (CDX-GT320/GT32W) page 8

To start the BTM function (press and hold).

BTM button (CDX-GT220/GT22W/ GT120) page 8

To start the BTM function (press and hold).

NRESET button (located behind the front panel) (CDX-GT320/GT32W only) page 5

ONumber buttons

CD:

(1)/(2): ALBUM –/+(during MP3/WMA playback) (CDX-GT320/GT32W/GT220/

GT22W)

To skip albums (press); skip albums continuously (press and hold).

(3): REP page 8

(4): SHUF page 8

(6): PAUSE

To pause playback of a CD on this unit. To cancel, press again.

Radio:

To receive stored stations (press); store stations (press and hold).

PReceptor for the card remote commander (CDX-GT320/GT32W/ GT220/GT22W only)

The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 5) (CDX-GT320/GT32W only).

qj < (.)/, (>) buttons

To control CD/radio, the same as (SEEK) –/+ on the unit.

Setup, sound setting, etc., can be operated by

< ,.

qk DSPL (display) button To change display items.

ql VOL (volume) +/– button To adjust volume.

w; ATT (attenuate) button

To attenuate the sound. To cancel, press again.

wa SEL (select) button

The same as the select button on the unit.

ws M (+)/m (–) buttons

To control CD, the same as (1)/(2) (ALBUM –/+) on the unit.

Setup, sound setting, etc., can be operated by M m.

wd SCRL (scroll) button

To scroll the display item.

wf Number buttons

To receive stored stations (press); store stations (press and hold).

*In the case of a CD/MD changer, HD radio tuner or SAT tuner being connected; when (SOURCE) is pressed, the connected device (“MD,” “HD,” “XM” or “SR”) will appear in the display, depending on which device is connected. Furthermore, if (MODE) is pressed, you can switch the changer, HD radio tuner band or SAT tuner band (CDX-GT320/GT32W only).

Note

If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.

7