Automatic tuning is not possible.

•Setting of the local seek mode is not correct. t Tuning stops too frequently:

Press (SENS) until “LOCAL-ON” appears. t Tuning does not stop at a station:

Press (SENS) repeatedly until “MONO-ON” or “MONO-OFF” (FM), or “LOCAL-OFF” (MW/ LW) appears.

•The broadcast signal is too weak.

tPerform manual tuning.

During FM reception, the “ST” indication flashes.

•Tune in the frequency accurately.

•The broadcast signal is too weak.

tPress (SENS) to set the monaural reception mode to “MONO-ON.”

An FM programme broadcast in stereo is heard in monaural.

The unit is in monaural reception mode.

tPress (SENS) until “MONO-OFF” appears.

RDS

The SEEK starts after a few seconds of listening.

The station is non-TP or has weak signal.

tDeactivate TA (page 9).

No traffic announcements.

•Activate TA (page 9).

•The station does not broadcast any traffic announcements despite being TP.

t Tune in another station.

PTY displays “- - - - - - - -.”

•The current station is not an RDS station.

•RDS data has not been received.

•The station does not specify the programme type.

Error displays/Messages

BLANK*1

Tracks have not been recorded on the MD.*2

tPlay an MD with recorded tracks.

ERROR*1

•The disc is dirty or inserted upside down.*2 t Clean or insert the disc correctly.

•A blank disc has been inserted.

•The disc cannot play because of some problem. t Insert another disc.

FAILURE

The connection of speakers/amplifiers is incorrect.

tSee the installation guide manual of this model to check the connection.

LOAD

The changer is loading the disc.

tWait until loading is complete.

L. SEEK +/–

The local seek mode is on during automatic tuning.

NO AF

There is no alternative frequency for the current station.

tPress (SEEK) –/+ while the programme service name is flashing. The unit starts searching for another frequency with the same PI (Programme Identification) data (“PI SEEK” appears).

NO DISC

The disc is not inserted in the CD/MD changer.

tInsert discs in the changer.

NO ID3

ID3 tag information is not written in the MP3 file.

NO INFO

Text information is not written in the ATRAC3/ ATRAC3plus or WMA file.

NO MAG

The disc magazine is not inserted in the CD changer.

tInsert the magazine in the changer.

NO MUSIC

The disc is not a music file.

tInsert a music CD in this unit or MP3 playable changer.

NO NAME

A track/album/group/disc name is not written in the track.

NO TP

The unit will continue searching for available TP stations.

NOT READ

The disc information has not been read by the unit.

tLoad the disc, then select it on the list.

NOTREADY

The lid of the MD changer is open or the MDs are not inserted properly.

tClose the lid or insert the MDs properly.

18