Rotary commander RM-X4SAttaching the label

Attach the indication label depending on how you mount the rotary commander.

1While pushing the VOL control, press and hold (SEL).

SEL

DSPL

MODE

MODE

DSPL

SEL

Location of controls

The corresponding buttons on the rotary commander control the same functions as those on this unit.

ATT

 

SEL

 

PRESET/

 

DISC

MODE

 

SOURCE

 

DSPL

OFF

 

VOL SEEK/AMS

OFF

The following controls on the rotary commander require a different operation from the unit.

•PRESET/DISC control

The same as (GP/ALBM) +/– on the unit (push in and rotate).

•VOL (volume) control

The same as the volume control dial on the unit (rotate).

•SEEK/AMS control

The same as (SEEK) –/+ on the unit (rotate, or rotate and hold).

Changing the operative direction

The operative direction of the controls is factory- set as shown below.

To increase

To decrease

If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.

Auxiliary audio equipment

You can connect optional Sony portable devices to the BUS AUDIO IN/AUX IN terminal on the unit. If the changer or other device is not connected to the terminal, the unit allows you to listen to the portable device on your car speakers.

Note

When connecting a portable device, be sure BUS CONTROL IN is not connected. If a device is connected to BUS CONTROL IN, “AUX” cannot be selected by (SOURCE).

Tip

When connecting both a portable device and a changer, use the optional AUX-IN selector.

Selecting auxiliary equipment

1Press (SOURCE) repeatedly until “AUX” appears.

Operate by the portable device itself.

Adjusting the volume level

Be sure to adjust the volume for each connected audio device before playback.

1Turn down the volume on the unit.

2Press (SOURCE) repeatedly until “AUX” appears.

3Start playback of the portable audio device at a moderate volume.

4Set your usual listening volume on the unit.

5Press the select button repeatedly until “AUX Level” appears, and rotate the volume control dial to adjust the input level (±6 dB).

11