Tuning automatically

1Select the band, then press (SEEK) –/+ to search for the station.

Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received.

Tip

If you know the frequency of the station you want to listen to, press and hold (SEEK) –/+ to locate the approximate frequency, then press (SEEK) –/+ repeatedly to fine adjust to the desired frequency (manual tuning).

USB devices

Playing back USB devices

1Connect the USB device to the USB terminal.

Playback starts.

If a USB device is already connected, press (SOURCE) repeatedly until “USB” appears, to start playback.

Press (OFF) to stop playback.

Notes

•Before removing a USB device, be sure to stop playback first. If you remove your USB device during playback, data in the USB device may be damaged.

•Do not use USB devices so large or heavy that they may fall down due to vibration, or cause a loose connection.

Display items

AAAC/WMA/ATRAC/MP3 indication

B ATRAC Audio Device: ALB, ART, PLY

Mass Storage Class: USB

C Track/album/group number, Disc/artist/ album/group/track name, Elapsed playing time, Text information, Clock

To change display items C, press (DSPL); scroll display items C, press (SCRL) or set “A.SCRL-ON” (page 12).

Tip

Displayed items will differ, depending on the recorded format and settings. For details on MP3/WMA/AAC, see page 15; ATRAC CD, see page 16.

Note

The display differs depending on the Mass Storage Class type USB device and ATRAC Audio Device.

9