Customizing the equalizer curve
— EQ3 Tune
“Custom” of EQ3 allows you to make your own equalizer settings.
1Select a source, then press (SOUND).
2Rotate the volume control dial to select “EQ3 parametric,” then press
(ENTER).
3Rotate the volume control dial to select “Custom,” then press (SEEK) + up.
4Rotate the volume control dial to select “EQ3 Mode Tune,” then press
(ENTER).
5Rotate the volume control dial to select the desired frequency range from “LOW,” “MID” or “HI,” then press
(ENTER).
6Rotate the volume control dial to select the center frequency you wish to adjust, then press (SEEK) + up.
Selectable frequency in each range: LOW: 60 Hz or 100 Hz
MID: 500 Hz or 1.0 kHz
HI: 10.0 kHz or 12.5 kHz
7Rotate the volume control dial to adjust the equalizer curve.
The volume level is adjustable in 1 dB steps, from
8Press (ENTER).
Repeat steps 5 to 8 to adjust other frequency ranges.
9Press (SEEK) – down.
The display returns to normal play/reception mode.
To restore the
Tip
Other equalizer types are also adjustable.
With the card remote commander
In steps 2 to 7: press M or m instead of the volume
control dial; in step 3, 6 and 9: press < or , instead of (SEEK)
Adjusting setup items — MENU
1Press (MENU).
2Rotate the volume control dial until the desired menu item appears, then press (ENTER).
3Rotate the volume control dial to select the setting, then press (ENTER).
The setting is complete.
4Press (MENU).
The display returns to normal play/reception mode.
With the card remote commander
In steps 2 to 3: press M or m instead of the volume control dial.
The following items can be set (follow the page reference for details):
“z” indicates the default settings.
Setup
Clock Adjust (page 5)
Beep
To set “on” (z) or “off.”
RM (Rotary Commander)
To change the operative direction of the rotary commander controls.
–“NORM” (z): to use the rotary commander in the
–“REV”: when you mount the rotary commander on the right side of the steering column.
Auto Off
To shut off automatically after a desired time when the unit is turned off: “NO” (z), “30 sec,” “30 min” or “60 min.”
Display
Auto Image
To set various display images.
–“All” (z): to step repeatedly through the display images in all display modes.
–“Movie”: to display a movie.
–“SA”: to display the Spectrum Analyzer.
–“off”: to not display any image.
Info (Information)
To display the items (depending on the source, etc.).
–“Simple” (z): to not display any items.
–“All”: to display all items.
–“Clear”: to have items automatically disappear.
Demo*1 (Demonstration)
To set “on” (z) or “off.”
12