GRESET button (Location behind the front panel) 4
HDisc slot 6
To insert the disc.
IDisplay window
J Z (eject)/ANGLE button 7
To eject the disc/slide down the front panel (press); angle the front panel in 3 positions (press and hold).
K
(front panel release) button 5
LSOURCE button
To power on; change the source (Radio/CD/ MD*1/AUX/SAT*2).
MLIST button 11, 14
To list up.
NDSPL (display) button 10
To change display items.
ONumber buttons
CD/MD*1:
(1): REP 10, 14
(2): SHUF 10, 14
(3)/(4): GP*4/ALBM*5
To skip albums (press); skip albums continuously (press and hold).*6
(5): BBE MP 2
To activate the BBE MP function, set “BBE MP on.” To cancel, set “BBE MP off.”
(6): PAUSE*7
To pause playback. To cancel, press again.
Radio:
To receive stored stations (press); store stations (press and hold).
PSCRL (scroll) button 10
To scroll the display item.
QOFF button
To power off; stop the source.
RAUX input jack 13
To connect a portable audio device.
The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 4).
ql ENTER button
To complete a setting.
w; </, (SEEK
CD/MD*1:
To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold);
Radio:
To tune in stations automatically (press); find a station manually (press and hold).
wa VOL (volume) +/– button
To adjust volume.
ws ATT (attenuate) button
To attenuate the sound. To cancel, press again.
wd SOUND button
To enter sound setting.
wf LIST/CAT*2 button 11, 14
To list up.
wg M/m
To select preset stations/skip groups (press); skip groups continuously (press and hold).
wh Number buttons
CD/MD*1:
(1): REP 10, 14
(2): SHUF 10, 14
(6): PAUSE*7
To pause playback. To cancel, press again.
Radio:
To receive stored stations (press); store stations (press and hold).
*1 When an MD changer is connected.
*2 When the SAT tuner is connected.
*3 When a CD/MD changer is connected.
*4 When an ATRAC CD is played.
*5 When an MP3/WMA/AAC is played.
*6 If the changer is connected, the operation is different, see page 14.
*7 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.
Tip
For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander” on page 17.
9