Setting the clock

The clock uses a 12-hour digital indication.

1Press (MENU).

2Rotate the volume control dial until “Clock Adjust” appears, then press

(ENTER).

The clock adjustment display appears.

3Rotate the volume control dial to set the hour and minute.

To move the digital indication, press (SEEK) +/–.

4After setting the minute, press

(ENTER).

The clock starts.

With the card remote commander

In steps 2 to 3: press M or m instead of the volume

control dial; in step 3: press < or , instead of (SEEK) –/+.

Detaching the front panel

You can detach the front panel of this unit to prevent theft.

Caution alarm

If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used.

1Press (OFF).

The unit is turned off.

2Press .

The left side of front panel is released.

3Slide the front panel to the left, then gently pull out the front panel towards you.

(OFF)

Notes

•Do not drop or put excessive pressure on the front panel and display window.

•Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray.

5