1Press (ZAP) during playback.

After “ZAPPIN” appears in the display, playback starts from a passage of the next track.

The passage is played for the set time, then a click sounds and the next passage starts.

Track

1

 

 

2

 

 

 

3

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ZAP

The part of each track to playback in ZAPPIN mode.

2Press the multi way encoder or (ZAP) when a track you want to listen is played back.

The track that you select returns to normal play mode from the beginning.To search a track by ZAPPIN mode again, repeat steps 1 and 2.

Tips

•You can select the playback time from about 6 seconds/9 seconds/30 seconds (page 20).You cannot select the passage of the track to playback.

•Push the multi way encoder left/right in ZAPPIN mode to skip a track.

•Push the multi way encoder up/down in ZAPPIN mode to skip album.

•Pressing (BACK) also confirms a track to playback.

Radio

Storing and receiving stationsCaution

When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM1Press (SOURCE) repeatedly until “TUNER” appears.

To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2.

2Press and hold the multi way encoder.3Rotate the multi way encoder until “BTM” appears, then press it.The unit stores stations in order of frequency in the preset list.A beep sounds when the setting is stored.Storing manually1While receiving the station that youwant to store, push (BROWSE)/CAT.The preset list appears.2Rotate the multi way encoder to select the preset number.3Push and hold the multi way encoder until “MEM” appears.(with the card remote commander)

1While receiving the station that you want to store, press and hold a number button ((1) to (6)) until “MEM” appears.

Note

If you try to store another station on the same number button, the previously stored station will be replaced.

Receiving the stored stations1Select the band, then push the multi way encoder up/down.

(with the card remote commander)

1Select the band, then press a number button ((1) to (6)).

13