Repeat and shuffle play

1During playback, press (1) (REP) on the card remote commander or (SHUF) on the unit repeatedly until the desired setting appears.

Select

To play

Repeat Track

track repeatedly.

 

 

Repeat Album

album repeatedly.

 

 

Repeat Podcastpodcast repeatedly.

 

 

Repeat Artistartist repeatedly.

 

 

Repeat Playlistplaylist repeatedly.

 

 

Repeat Genregenre repeatedly.

 

 

Shuffle Album

album in random order.

 

 

Shuffle Podcastpodcast in random order.

 

 

Shuffle Artistartist in random order.

 

 

Shuffle Playlistplaylist in random order.

 

 

Shuffle Genregenre in random order.

 

 

Shuffle Device

device in random order.

 

 

To return to normal play mode, select “Repeat off” or “Shuffle off.”

After about 3 seconds, the setting is complete.

Operating an iPod directly— Passenger controlYou can operate an iPod connected to the dock connector directly.1During playback, press and hold(MODE).“Mode iPod” appears and you will be able to operate the iPod directly.To exit the passenger controlPress and hold (MODE).Then “Mode Audio” will appear and the play mode will change to “Resuming.”

Notes

•The volume can be adjusted only by the unit.

•If this mode is canceled, the repeat setting will be turned off.

Other functionsChanging the sound settingsAdjusting the sound characteristics1Press the multi way encoder.

2Rotate the multi way encoder until the desired menu item appears, then press it.

3Use the multi way encoder to select the setting, then press it.4Press (BACK).The setting is complete and the display returns to normal play/reception mode.The following items can be set:The operation of the multi way encoder will differ depending on the items. : Push the multi way encoder up/down : Push the multi way encoder left/right : Rotate the multi way encoderEQ3 Parametric Preset ( or ) Selects an equalizer curve from 7 music types.EQ3 Parametric Tune*1

Custom equalizer settings. See “Customizing the equalizer curve — EQ3 Parametric Tune”

Subwoofer Tune & LPFPhase ( , or press (MODE)) Selects the phase: “Normal,” “Reverse.” FREQ ( )

Selects the subwoofer cut-off frequency: “80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz,” “off.”

Level ( )Adjusts the subwoofer volume: “+10 dB” – “0 dB” – “–10 dB.”(“– ∞” is displayed at the lowest setting.)HPF & Speaker SelectSpeaker ( )Selects the Speaker: “All,” “Front”, or “Rear.” FREQ ( )

Selects the cut-off frequency: “off,” “80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz.”

DM+ Advanced*2 ( or )Improves digitally compressed sound, such as MP3.To activate the DM+ Advanced function, set “on.” To cancel, set “off.”

18