Sony CDX-GT930UI Getting Started, Setting the clock, Resetting the unit, Canceling the DEMO mode, Detaching the front panel, Playable discs on this unit, MP3, WMA, AAC, CD-DA

Getting Started

2

Playable discs on this unit

This unit can play CD-DA (also containing CD TEXT) and CD-R/CD-RW (MP3/WMA/AAC files (page 23)).

Type of discs Label on the disc

CD-DAMP3WMAAACResetting the unit

Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit.

Detach the front panel (page 6) and press the RESET button (page 8) with a pointed object, such as a ball-point pen.

Note

Pressing the RESET button will erase the clock setting and some stored contents.

Canceling the DEMO modeYou can cancel the demonstration display which appears during turning off.1Press and hold the multi way encoder.The setup display appears.2Rotate the multi way encoder until “Demo” appears, then press it.3Rotate the multi way encoder to select “off.”4Press and hold the multi way encoder.The setup is complete and the display returns to normal play/reception mode.

Preparing the card remote commanderRemove the insulation film.

Tip

For how to replace the battery, see page 24.

Setting the clockThe clock uses a 12-hour digital indication.

1Press and hold the multi way encoder.

2Rotate the multi way encoder until “Clock Adjust” appears, then press it.The clock adjustment display appears.3Rotate the multi way encoder to set the hour and minute.To move the digital indication, push the multi way encoder left/right.4After setting the minute, press the multi way encoder.The clock starts.Detaching the front panelYou can detach the front panel of this unit to prevent theft.Caution alarm

If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used.

1Press (OFF).The unit is turned off.2Press .The left side of front panel is released.

6