Error displays/Messages

BLANK

Tracks have not been recorded on the MD.*1

tPlay an MD with recorded tracks.

ERROR*2

•The disc is dirty or inserted upside down.*1 t Clean or insert the disc correctly.

•A blank disc has been inserted.

•The disc cannot play due to a problem. t Insert another disc.

FAILURE

The connection of speakers/amplifiers is incorrect.

tSee the installation guide manual of this model to check the connection.

FAILURE (Illuminates for about 1 second.) (CDX-H905IP only)

When the XM tuner is connected, storing an XM radio channel into a preset failed.

tBe sure to receive the channel that you want to store, then try it again.

LOAD

The changer is loading the disc.

tWait until loading is complete.

L. SEEK +/–

The local seek mode is on during automatic tuning.

NO AF (CDX-HR905IP only)

There is no alternative frequency for the current station.

tPress (SEEK) –/+ while the program service name is flashing. The unit starts searching for another frequency with the same PI (Program Identification) data (“PI SEEK” appears).

NO DISC

The disc is not inserted in the CD/MD changer.

tInsert discs in the changer.

NO INFO

Text information is not written in the MP3/WMA/ AAC files or ATRAC CD.

NO IPOD

No iPod connected.

tConnect iPod to dock connector.

If “NO IPOD” appears while connecting the iPod to the dock connector, disconnect the iPod from the dock connector, then reconnect.

NO MAG

The disc magazine is not inserted in the CD changer.

tInsert the magazine in the changer.

NO MUSIC

The disc does not contain a music file.

tInsert a music CD in this unit or MP3 playable changer.

NO NAME

A disc/group/track name is not written in the track.

NO TP (CDX-HR905IP only)

The unit will continue searching for available TP stations.

NOTREADY

The lid of the MD changer is open or the MDs are not inserted properly.

tClose the lid or insert the MDs properly.

OFFSET

There may be an internal malfunction.

tCheck the connection. If the error indication remains on in the display, consult your nearest Sony dealer.

READ

The unit is reading all track and group/album information on the disc.

tWait until reading is complete and playback starts automatically. Depending on the disc structure, it may take more than a minute.

RESET

The CD unit and CD/MD changer cannot be operated due to a problem.

tPress the RESET button (page 7).

“ ” or “ ”

During reverse or fast-forward, you have reached the beginning or the end of the disc and you cannot go any further.

“”

The character cannot be displayed with the unit.

*1 The disc number of the disc causing the error appears in the display.

*2 If an error occurs during playback of a CD or MD, the disc number of the CD or MD does not appear in the display.

If these solutions do not help improve the situation, consult your nearest Sony dealer.

If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the time the problem began.

24