Sony CDX-L450 Receiving the memorised stations, Memorising only the desired stations, If you cannot tune in a preset station, (1), (6)

Notes

•The unit does not store stations with weak signals. If only a few stations can be received, some number buttons will retain their former setting.

•When a number is indicated in the display, the unit starts storing stations from the one currently displayed.

•If a CD is not in the unit, only the tuner band appears even if you press (SOURCE).

Memorising only the desired stations

You can preset up to 18 FM stations (6 each for FM1, FM2, and FM3), up to 6 MW stations, and up to 6 LW stations in the order of your choice.

1 Press (SOURCE) repeatedly to select the tuner.

2 Press (MODE) repeatedly to select the band.

3 Press either side of (SEEK/AMS) to tune in the station that you want to store on the number button.

4 Press the desired number button ((1) to

(6)) for two seconds until “MEM” appears.

The number button indication appears in the display.

Note

If you try to store another station on the same number button, the previously stored station will be erased.

Receiving the memorised stations

1 Press (SOURCE) repeatedly to select the tuner.

2 Press (MODE) repeatedly to select the band.

3 Press the number button ((1) to (6)) on which the desired station is stored.

Tip

Press either side of (PRST) to receive the stations in the order they are stored in the memory (Preset Search Function).

If you cannot tune in a preset station

Press either side of (SEEK/AMS) to search for the station (automatic tuning). Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received.

Note

If the automatic tuning stops too frequently, press (MENU), then press either side of (PRST) repeatedly until “LOCAL” (local seek mode) is displayed. Then press the (+) side of (SEEK/AMS) to select “LOCAL-ON.” Press (ENTER).

Only the stations with relatively strong signals will be tuned in.

Tips

•When you select the “LOCAL-ON” setting, “L.SEEK” appears while the unit is searching for a station.

•If you know the frequency of the station you want to listen to, press and hold either side of (SEEK/AMS) until the desired frequency appears (manual tuning).

11