Using the rotary commander (optional)

By rotating the control (the SEEK/AMS control)

The rotary commander works by pressing buttons and/or rotating controls.

By pressing buttons

(the SOURCE and MODE buttons)

(SOURCE)

(MODE)

Each time you press (SOURCE), the source changes as follows:

Tuner t CD

Pressing (MODE) changes the operation in the following ways:

•Tuner: FM1 t FM2 t FM3 t MW t LW

Rotate the control momentarily and release it to:

•Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to start playback.

•Tune in stations automatically. Rotate and hold the control to find a specific station.

By pushing in and rotating the control (the PRESET/DISC control)

Push in and rotate the control to:

•Receive the stations memorised on the number buttons.

•Change the disc.

18