Press (GRAPHIC).

Adjusting the character color

1 Press (SOURCE) to select a source (radio, CD, MD, or AUX).

2

3 Press < or , repeatedly to select

“Color Sel,” then press (ENTER). Each time you press < or ,, the item changes as follows:

AutoClear y BlendLevel y

Plaque y Color Sel y

AutoImage y AutoClear

4 Press (ENTER).

5 Press M or m to select “Custom,” then press (ENTER).

6 Press M or m repeatedly to select one among Red-Green-Blue.

Each time you press M or m, the item changes.

7 Press < or , to adjust the level of the color.

Repeat steps 7 and 8 to set the character display to your desired color.

8 Press (ENTER).

9 Press M or m to select “Save,” then press (ENTER).

To return to the former character color, select “Cancel,” then press (ENTER).

To restore the factory-set character color, select “Reset,” then press (ENTER).

10 Press (GRAPHIC).

The display returns to the normal display.

Selecting the display period of the images

— AutoImage

The pre-stored images switch in sequence automatically. You can select the display period for an image.

1 Press (SOURCE) to select a source (radio, CD, MD, or AUX).

2 Press (GRAPHIC).

3 Press < or , repeatedly to select “AutoImage.”

Each time you press < or ,, the item changes as follows:

AutoClear y BlendLevel y

Plaque y Color Sel y

AutoImage y AutoClear

4 Press (ENTER).

5 Press (ENTER).

6 Press M or m repeatedly to select the display period for an image.

Each time you press M or m, the item changes as follows:

Middle y Fast y OFF y Slow y

Middle

To cancel the Slide Show function, select “OFF.”

7 Press (ENTER).

8 Press (GRAPHIC).

The display returns to the normal display.

23