7 Press M or m repeatedly to select the desired equalizer curve.

8 Press (ENTER).

9 Select the desired frequency and level.

1Press < or , repeatedly to select the desired frequency.

Each time you press < or ,, the frequency changes.

62 Hz y 157 Hz y 396 Hz y 1000 Hz y 2510 Hz y 6340 Hz y 16000 Hz

2Press M or m repeatedly to adjust the desired level.

The level is adjustable by 1 dB steps from –10 dB to +10 dB.

To restore the factory-set equalizer curve, press (ENTER) for 2 seconds.

3Repeat steps 1 and 2 to adjust the equalizer curve.

10 Press (ENTER).

After the effect setting is completed, the display returns to the normal display.

Adjusting the front and rear volume

1 Press (SOURCE) to select a source (radio, CD, MD, or AUX).

2 Press (SOUND).

3 Press < or , repeatedly to select “Fader.”

4 Press (ENTER).

5 Press < or , repeatedly to adjust the volume of front/rear speakers.

6 Press (ENTER).

The display returns to the normal display.

Adjusting the cut-off frequency for the front/rear speakers

To match the characteristics of the installed speaker system, you can select the cut-off frequency of the speakers.

Level

 

Cut-off frequency

 

 

 

off

 

 

 

Frequency (Hz)

1 During playback or radio reception, press (MENU).

2 Press < or , repeatedly to select “SoundTuning.”

3 Press (ENTER).

4 Press M or m repeatedly to select “HPF.”

5 Press (ENTER).

continue to next page t

27