Changing the operative direction

The operative direction of controls is factory-set as shown below.

To increase

To decrease

If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.

Adjusting the sound characteristics

You can adjust the bass, treble, balance, fader, and subwoofer volume.

1 Press (SOUND) repeatedly to select the desired item.

Each time you press (SOUND), the item changes as follows:

BAS (bass) t TRE (treble)tBAL (left-right) t FAD (front-rear)tSUB (subwoofer volume)2 Adjust the level of a selected item by pressing < or ,.

When adjusting with the rotary commander, press (SOUND) and rotate the VOL control.

Press (SOUND) for 2 seconds while pushing the VOL control.

Tip

You can also change the operative direction of these controls with the unit (page 18).

After 3 seconds, the display returns to the normal playback mode.

Note

Adjust within 3 seconds after selecting the item.

17