Quickly attenuating the sound

(With the rotary commander or the card remote commander)Press (ATT).

“ATT on” appears in the display momentarily.

To restore the previous volume level, press (ATT) again.

Tip

When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function).

Changing the sound and display settings

— Menu

The following items can be set:

Set Up

•Clock (page 8)

•Beep — to turn the beeps on or off.

•AUX-A (page 21) — to turn the AUX source display on or off.

•RM (Rotary Commander) — to change the operative direction of the controls of the rotary commander.

–Select “Normal” to use the rotary commander at the factory-set position.

–Select “Reverse” when you mount the rotary commander on the right side of the steering column.

Display

•D.Info (Dual Information) — to display the clock and the play mode at the same time (on).

•SA (Spectrum Analyzer) (page 21) — to change the display pattern of the sound signal level.

•DEMO (Demonstration) — to turn the Demonstration mode on or off.

–Select “on” to activate DEMO display.

–Select “off” to deactivate the Demonstration mode.

•Dimmer — to change the brightness of the display.

–Select “Auto” to dim the display only when you turn the lights on.

–Select “on” to dim the display.

–Select “off” to deactivate the Dimmer.

•Contrast — to adjust the contrast if the indications on the display are not recognizable because of the unit’s installation position.

•BlackOut — to blacken the display, while the operation mode is on.

–Select “on” to black out the indications. The indications will disappear, but the unit will react if you press any button.

–Select “off” to brighten the display.

•A.Scroll (Auto Scroll)

–Select “on” to scroll all automatically displayed names exceeding 12 characters.

–When Auto scroll is set to off and the disc/ track/album is changed, the disc/track/album name or ID3 tag does not scroll.

18