Adjusting the equalizer curve1 Press (MENU).2 Press M or m repeatedly until “EQ7 Tune” appears, then press (ENTER).

3 Press < or , to select the desired equalizer curve, then press (ENTER). Each time you press < or ,, the item changes.

4 Select the desired frequency and level.1Press < or , to select the desired frequency.

Each time you press < or ,, the frequency changes as follows:

62 Hz y 157 Hz y 396 Hz y 1.0 kHz y 2.5 kHz y 6.3 kHz y 16 kHz2Press M or m to adjust the desired volume level.

The volume level is adjustable by 1 dB steps from –10 dB to +10 dB.

To restore the factory-set equalizer curve, press (ENTER) for 2 seconds.

5 Press (ENTER).

After the effect setting is complete, the display returns to the normal playback mode.

Setting the Dynamic Soundstage Organizer (DSO)

If your speakers are installed into the lower part of the doors, the sound will come from below and may not be clear.

The DSO (Dynamic Soundstage Organizer) function creates a more ambient sound as if there were speakers in the dashboard (virtual speakers).

You can store the DSO setting for each source.

1 Press (SOURCE) to select a desired source.2 Press (DSO) to select “1, 2, 3” or “off”.

To cancel the DSO mode, select “DSO off.” After 3 seconds, the display returns to the normal playback mode.

Notes

•Depending on the type of car interior or type of music, DSO may not have a desirable affect.

•If FM broadcasts are difficult to hear, set DSO to off.

20