Radio

The unit can store up to 6 stations per band (FM1, FM2, FM3, MW, and LW).Caution

When tuning in stations while driving, use Best Tuning Memory to prevent accidents.

Storing stations automatically
— Best Tuning Memory (BTM)

The unit selects the stations with the strongest signals within the selected band, and stores them in the order of their frequency.

1 Press (SOURCE) repeatedly to select the radio.2 Press (MODE) repeatedly to select the band.3 Press (MENU), then press M or m repeatedly until “BTM” appears.4 Press (ENTER).A beep sounds when the setting is stored.

Notes

•If only a few stations can be received due to weak signals, some number buttons will retain their former settings.

•When a number is indicated in the display, the unit starts storing stations from the one currently displayed.

Receiving the stored stations

1 Press (SOURCE) repeatedly to select the radio.

2 Press (MODE) repeatedly to select the band.

3 Press the number button ((1) to (6)) on which the desired station is stored.

Tip

Press M or m to receive the stations in the order they are stored in the memory (Preset Search function).

If preset tuning does not workPress (SEEK) (<) or (SEEK) (,) to search for the station (automatic tuning).

Scanning stops when the unit receives a station. Repeat until the desired station is received.

Tips

•If automatic tuning stops too frequently, turn on the Local Seek to limit seek to stations with stronger signals. See “Changing the sound and display settings” on page 22.

•If you know the frequency of the station you want to listen to, press and hold < or , to locate the approximate frequency, then press < or , repeatedly to fine adjust to the desired frequency (manual tuning).

If FM stereo reception is poorSelect monaural reception modeSee “Changing the sound and display settings” on page 22.The sound improves, but becomes monaural (“ST” disappears).

Tip

If FM broadcasts are difficult to hear, set DSO to off (page 24).

14