Getting Started

Resetting the unit

Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit.

Press the RESET button with a pointed object, such as a ballpoint pen.

RESET button

Resetting the unit during use in sub- display position

RESET button

Detaching the front panel

You can detach the front panel of this unit to protect the unit from being stolen.

When the front panel is in the sub-display position, press (CLOSE) on the unit for 2 seconds. If a disc is partially inserted, load the disc correctly or remove the disc from the unit.

Caution alarm

If you turn the ignition switch to the OFF position without removing the front panel, the caution alarm will beep for a few seconds.

1 Press (OPEN) on the unit for 2 seconds.The front panel automatically tilts at an angle of 30°.

(OPEN)

2 Detach the front panel as illustrated. After the front panel is completely detached, the sub display closes automatically.

Notes

• After resetting the unit in the closed position, be sure to press (OPEN) on the unit once before operating further. If a disc is in the unit, the disc will be ejected automatically. Insert the disc again.

•Pressing the RESET button will erase the clock setting and some stored contents.

Notes

• If you detach the front panel while the unit is still turned on, the power will turn off automatically to prevent the speakers from being damaged.

• Do not drop or put excessive pressure on the front panel and the display window.

• Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in parked cars or on dashboards/rear trays.

Tip

When carrying the front panel with you, use the supplied front panel case.

8