Removing the unit

With the front panel open1 Remove the front cover

1Press (OPEN/CLOSE) or (OPEN) of the unit, then press the clip inside the front cover with a thin screwdriver, and gently pry the front cover free.

If the front panel does not open because of a blown fuse

1 Remove the front cover

1Press the clip inside the front cover with a release key (supplied), and pry the front cover free.

2Repeat step 1 on the left side.The front cover is removed.2 Remove the unit

1Use a thin screwdriver to push in the clip on the left side of the unit, then pull out the left side of the unit until the catch clears the mounting.

2Repeat step 1 on the right side.3Slide the unit out of the mounting.

Release key (supplied)

Note

To protect the surface of the unit, put thin cloth between release key and the unit by inserting the release key.

2Repeat step 1 on the left side.

The front cover is removed.

2 Remove the unit

1Use a release key to push in the clip on the left side of the unit, then pull out the left side of the unit until the catch clears the mounting.

2Repeat step 1 on the right side.

3Slide the unit out of the mounting.

27