Selecting the spectrum analyzer (SA)

The sound signal level is displayed on a spectrum analyzer. You can select a display for 6 patterns (Auto, A-1, A-2, B-1 to B-3), or “off.”

1 Press (SOURCE) to select a source (radio, CD, or MD).

2 Press (MENU).3 Press M or m repeatedly until “SA” appears.4 Press < or , repeatedly to select the desired setting.

5 Press (ENTER).

Labelling a Motion Display

You can label a Motion Display with up to 64 characters to appear when the unit is turned off. Labels will scroll in the display in the M.Dspl 1 mode (The display remains lit even when the power is off).

1 Press (OFF).

CD/MD playback or radio reception stops (the key illumination and display remain on).

2 Press (MENU), then press M or m repeatedly until “Name Input” appears.

3 Press (ENTER).

4 Enter the characters.

1Press (DSPL/PTY) to select the character type.A t a t 0 t A2Press M*1 repeatedly to select the desired character.A t B t C t ... x t y t z t 0 t 1t2 ... t ! t “ t # ... t *2 t A

*1 For reverse order, press m.

*2 (blank space)

3Press , after locating the desired character.

If you press <, you can move back to the left.

4Repeat steps 1 to 3 to enter the entire sentence.

5 Press (ENTER).

Tips

•Simply overwrite or enter “ ” to correct or erase a sentence.

•To erase all sentences, press (ENTER) for 2 seconds after step 4.

25