MENU
DSPL

5Press M or m repeatedly to adjust the desired volume level.

The volume level is adjustable in 1 dB steps, from –10 dB to +10 dB.

Repeat steps 4 and 5 to adjust the equalizer curve.

To restore the factory-set equalizer curve, press and hold (ENTER).

6Press (MENU) twice.

The setting is complete and the display returns to normal play/reception mode.

Labeling a station/disc

When you receive a station, or play a disc in a CD changer with the CUSTOM FILE function, you can label each station/disc with a custom name up to 8 characters (Station Memo/Disc Memo).

If you label a station/disc, the name appears on the list (page 9 or 12).

(With the card remote commander)

1While receiving a station or playing a disc that you want to label, press

(MENU).

2Press M or m repeatedly until “Name Edit” appears, then press (ENTER).

3Press M or m repeatedly until the desired character appears.

The character changes as follows:

A y B y C ... y 0 y 1 y 2 ... y + y – y ... y _ (blank space) y A

To move the digital indication, press the < or ,.

Repeat this operation until the entire name is entered.

4Press (ENTER).

The labeling is complete and the display returns to normal reception/play mode.

To display the name, press (DSPL) during reception/playback.

10

Tips

•To correct or erase a character, overwrite or enter “ _.”

•The Disc Memo always takes priority over any prerecorded title.

•You can label a disc on the unit if a changer with the CUSTOM FILE function is connected.

•“Repeat-Track” and all shuffle play are suspended until the labeling is complete.

Deleting the custom name

(With the card remote commander)

1Select the radio, or the unit that has stored the custom name you want to delete, then press

(MENU).

2Press M or m repeatedly until “Name Delete” appears, then press (ENTER).

The stored name will appear.

3Press M or m repeatedly to select the name you want to delete.

4Press and hold (ENTER).

The name is deleted. Repeat steps 3 and 4 if you want to delete other names.

5Press (MENU) twice.

The unit returns to normal reception/play mode.

Adjusting menu items — MENU

You can adjust various menu settings by using the 4 arrow buttons on the card remote commander.

(With the card remote commander)

LIST/

CAT

+

ENTER

–

SCRL

1Press (MENU).

2Press M or m repeatedly until the desired item appears.

3Press < or , to select the desired setting (example: “on” or “off”).

4Press (ENTER).

The setting is complete and the display returns to normal play/reception mode.

Note

Displayed items will differ, depending on the source and setting.

Tip

You can easily switch among categories by pressing and holding M or m.