Receiving a station through a list— LIST

You can list up the frequency or the name. For details on labeling a station, see page 10.

(With the card remote commander)

1Select the band, then press (LIST).

The frequency or station appears.

2Press M or m repeatedly until the desired station appears.

3Press (ENTER) to receive the station.

Other functions

Changing the sound settings

Adjusting the sound characteristics

You can adjust the bass, treble, balance, fader and subwoofer volume.

1Select a source, then press (SOUND) repeatedly to select the desired item.

The item changes as follows:

BAS (bass) t TRE (treble) t

BAL (left-right) t FAD (front-rear) t SUBW (subwoofer volume)*

*“ATT” is displayed at the lowest setting, and can be adjusted up to 20 steps.

2Press the volume +/– button repeatedly to adjust the selected item.

After 3 seconds, the setting is complete and the display returns to normal play/reception mode.

Note

Adjust within 3 seconds of selecting the item.

With the card remote commander

In step 2, to adjust the selected item, press < or ,.

Adjusting the equalizer curve— EQ7 Tune

You can adjust and store the equalizer settings for different tone ranges.

(With the card remote commander)

1Select a source, then press (MENU).

2Press M or m repeatedly until “EQ7 Tune” appears, then press (ENTER).

3Press < or , repeatedly to select the desired equalizer type, then press

(ENTER).

4Press < or , repeatedly to select the desired frequency.

The frequency changes as follows:

62Hz y 157Hz y 396Hz y 1kHz y 2.5kHz y 6.3kHz y 16kHz

continue to next page t

9