Refer to the pages listed for details. The corresponding buttons on the card remote commander control the same functions as those on the unit.

aVolume +/– buttonTo adjust volume.bSEL (select) button 4, 9To select items.cSOURCE buttonTo power on/change the source (Radio/CD).dMODE button 8To select the radio band (FM/AM).eDisc slotInsert the disc (label side up), playback starts.fDisplay windowgATT (attenuate) buttonTo attenuate the sound. To cancel, press again.hEQ3 (equalizer) button 9To select an equalizer type (XPLOD,VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM or OFF).iZ (eject) buttonTo eject the disc.jSEEK +/– buttonRadio:

To tune in stations automatically (press); find a station manually (press and hold).

CD:

To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); fast-forward/ reverse a track (press and hold).

k (front panel release) button 4lDSPL (display)/DIM (dimmer) button 4, 8To change display items (press); change thedisplay brightness (press and hold).mSENS buttonTo improve weak reception: LOCAL/MONO.nRESET button (located behind the front panel) 4oFrequency select switch (located on the bottom of the unit)See “Frequency select switch” in the supplied installation/connections manual.pNumber buttons

Radio:

To receive stored stations (press); store stations (press and hold).

CD:

(1)/(2): GROUP* –/+To skip groups (press); skip groups continuously (press and hold).(3): REP 8(4): SHUF 8
qBTM button 8To start the BTM function (press and hold).rOFF buttonTo power off/stop the source.sReceptor for the card remote commander 10

The following buttons on the card remote commander have also different buttons/functions from the unit.

t< (.)/, (>) buttons

To control radio/CD, the same as (SEEK) +/– on the unit. (For details of other operations, see “With the card remote commander” on each pages.)

uVOL +/– button

To adjust volume.

vM (+)/m (–) buttons

To control CD, the same as (1)/(2) –/+ on the unit. (For details of other operations, see “With the card remote commander” on each pages.)

wSCRL buttonTo scroll the display item.xNumber buttons

To receive stored stations (press); store stations (press and hold).

*When an MP3/ATRAC CD is played.

Note

If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.

Tip

For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander” on page 13.

7