1Remove the protection collar.
1 Detach the front panel (page 4).
2 Engage the release keys together with the protection collar.
Orient the release keys as shown.
3Pull out the release keys to remove the protection collar.
2Remove the unit.
1 Insert both release keys simultaneously until they click.
Hook facing inwards.
2Pull the release keys to unseat the unit.
3Slide the unit out of the mounting.
CD Player section
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Tuner section
FM
Tuning range: 87.5 – 108.0 MHz
Aerial terminal: External aerial connector
Intermediate frequency: 10.7 MHz/450 kHz
Usable sensitivity: 9 dBf
Selectivity: 75 dB at 400 kHz
Harmonic distortion at 1 kHz: 0.5 % (stereo),
0.3% (mono) Separation: 35 dB at 1 kHz Frequency response: 30 – 15,000 Hz
MW/LW
Tuning range:
MW: 531 – 1,602 kHz
LW: 153 – 279 kHz
Aerial terminal: External aerial connector
Intermediate frequency: 10.7 MHz/450 kHz
Sensitivity: MW: 30 µV, LW: 40 µV
Power amplifier section
Outputs: Speaker outputs (sure seal connectors)
Speaker impedance: 4 – 8 ohms
Maximum power output: 50 W ⋅ 4 (at 4 ohms)
General
Outputs:
Audio outputs terminal (sub/rear switchable) Power aerial relay control terminal
Power amplifier control terminal
Inputs:
Telephone ATT control terminal
Aerial input terminal
Tone controls:
Low: ±10 dB at 60 Hz (XPLOD)
Mid: ±10 dB at 1 kHz (XPLOD)
High: ±10 dB at 10 kHz (XPLOD) Power requirements: 12 V DC car battery
(negative earth)
Dimensions: Approx. 178 ⋅ 50 ⋅ 178 mm (w/h/d)
Mounting dimensions: Approx. 182 ⋅ 53 ⋅ 161 mm (w/h/d)
Mass: Approx. 1.2 kg
Supplied accessories:
Parts for installation and connections (1 set) Front panel case (1)
Optional accessories:
Card remote commander:
Rotary commander:
US and foreign patents licensed from Dolby Laboratories.
Design and specifications are subject to change without notice.
continue to next page t
13