Note
If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.
Replacing the lithium battery
Under normal conditions, the battery will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.)
When the battery becomes weak, the range of the card remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion.
x
+ side up
Notes on the lithium battery
•Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.
•Wipe the battery with a dry cloth to assure a good contact.
•Be sure to observe the correct polarity when installing the battery.
•Do not hold the battery with metallic tweezers, otherwise a
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of in fire.
Rotary commander RM-X4S (CDX-S2250V only)
Attaching the label
Attach the indication label depending on how you mount the rotary commander.
Location of controls
The corresponding buttons on the rotary commander control the same functions as those on this unit.
ATT |
|
SEL |
|
PRESET |
|
| MODE |
SOURCE |
|
DSPL | OFF |
| |
VOL SEEK/AMS | OFF |
The following controls on the rotary commander require a different operation from the unit.
•PRESET control
To select preset stations (push in and rotate).
•VOL control
The same as the volume +/– button on the unit (rotate).
•SEEK/AMS control
The same as (SEEK) +/– on the unit (rotate, or rotate and hold).
Changing the operative direction
The operative direction of the controls is factory- set as shown below.
To increase
To decrease
If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.
1While pushing the VOL control, press and hold (SEL).
10
SEL MODE DSPL
DSPL MODE SEL