The Timer
Setting the clock
CLOCK | TUNING/TIME | DISPLAY/ENTER |
| SET +/– | MEMORY |
Before you set the clock, connect the AC power adaptor (see page 25.)
Before you set the clock, “0:00” flashes.
Tip
The time display system:
Timer The
1 Press CLOCK for about 2 seconds until the hour digit flashes.
2 Press TUNING/TIME SET +/– until you set the current hour. Then press DISPLAY/ENTER• MEMORY.
The minute digits flash. Set the minutes by pressing TUNING/TIME SET +/– until the correct minute is displayed.
/
3 Press DISPLAY/ENTER•MEMORY.
The clock starts from 00 seconds.
The Timer 21EN