Tip
You can have the player go on the next day at the same time. Just press STANDBY until the tindication appears in the display. The preset settings remain until you reset them.
Note
The timer mode is canceled:
–when you press ( button of the tape player while music plays in the timer mode.
–when you select “TAPE” using
FUNCTION.
6 Press TUNING/TIME SET +/– to set the volume, then DISPLAY/ENTER•MEMORY.
7 Press STANDBY.
The tindication lights up and the power goes off.
At the preset time, the power will go on, and the music will play. Then the power will go off at the preset time, and the player will enter into the standby mode.
To check/change when the playback will start
Press TIMER, then DISPLAY/ENTER•MEMORY. Each time you press DISPLAY/ENTER•MEMORY, a stored setting lights up. Change the setting if you need to when the setting lights up.
To use the player before a timer playback starts
Just turn on the player, and then you can use it.
If you turn off the player before the preset time, timer playback will start at the preset time.
In case of the radio, however, if you listen to the station which is different from the one you tuned in in step 1 on page 22, you will hear that station at the preset time. Make sure to tune in the station you want to listen to before you turn off the player.
To stop play
Press OPERATE.
Timer The
The Timer 23EN