SymptomRemedy
Tape Player
Timer
The tape does not move when you | • Close the cassette compartment securely. |
press an operation button. |
|
|
|
The REC rbutton does not | • Make sure the safety tab on the cassette is in |
function/The tape does not play. | place. |
| • Make sure “TAPE” appears in the display. |
|
|
The tape does not erase completely. | • Clean the erasing head (see page 32). |
| • The source which was recorded on TYPE II |
| (high position) or TYPE IV (metal) tape using |
| this unit is being played. Record on TYPE I |
| (normal) tape and play. |
|
|
The tape does not record. | • Make sure the tape is inserted properly. |
| • Make sure the safety tab of the cassette is in |
| place. |
|
|
The audio is weak/The audio | • Clean the heads, pinch roller and capstan (see |
quality is poor. | page 32). |
| • Demagnetize the heads using a demagnetizer |
| (see page 32). |
|
|
The sound is distorted. | • The TYPE II (high position) or TYPE IV (metal) |
| tape is being used. Use TYPE I (normal) tape |
| only. |
The timer does not operate. | • Make sure the time on the clock is correct. |
| • Check to see if the AC power had been cut off. |
| • Make sure the t(clock) indication is displayed. |
The player uses a
Additional Information |
| 31EN |
| ||
|
|
|