3 | Start recording. |
Press z on deck B (N is depressed automatically).
Operations Basic
•During recording, do not press M, m or PLAY on deck A as this causes excessive wow and flutter.
•While recording from the
•When you connect the microphone to the MIX MIC jack, you cannot record from the
Tips
•Adjusting the volume or selecting the audio emphasis (see page 18) will not affect the recording level.
•If the MW program makes a whistling sound after you've pressed z in step 3, set the ISS•FM MODE (Interference Suppress Switch) at the rear to the position that most decreases the noise.
•For the best results, use the AC power as a power source.
•To erase a recording, proceed as follows:
1Insert the tape into deck B.
2Disconnect the audio source if connected to the TV/LINE IN jack at the rear.
3Set FUNCTION to TV/
LINE IN.
4Press z on deck B.
Use these buttons for additional operations
xZ X
n
xZ
X
To | Press |
stop recording | xZ on deck B |
|
|
pause recording | X on deck B |
| Press the button again to resume |
| recording. |
|
|