Creating your own
program (Program Play)
You can arrange the playing order of up to 20 tracks on a CD.
Number buttons
MODE 
DISPLAY
N
1 Set FUNCTION to CD on the player.
2 Press MODE until “PGM” appears in the display.
3 Press the number buttons for the tracks you want to program in the order you want.
Playing order
Programed track
4 Press N to start program play.
On the player
1 Set FUNCTION to CD.
2 Press PLAY MODE until “PGM” appears in the display.
3 Press . or > then press DISPLAY/ ENTER for the tracks you want to program in the order you want.
4 Press u.
To cancel Program Play
Press MODE until “PGM” disappears from the display.
To check the order of tracks before play
Press DISPLAY.
Every time you press the button, the track number appears in the programed order.
To change the current program
Press x once if the CD is stopped and twice if the CD is playing. The current program will be erased. Then create a new program following the programing procedure.
Tips
•You can play the same program again, since the program is saved until you open the CD compartment or switch FUNCTION.
•The current program will be erased if you switch FUNCTION or open the CD compartment.
•You can record your own program. After you’ve created the program, insert a blank tape into deck B and press z on deck B to start recording.