Sony CFD-Z120 Creating your own program

15
The CD Player
The CD Player
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
Creating your
own program
(Program Play)
You can arrange the playing order of the
tracks on a CD.
FUNCTION
=/+
1Set FUNCTION to CD.
2Press PLAY MODE until “PGM” appears in the
display.
3Press + or = then press DISPLAY/ENTER
for the tracks you want to program in the order
you want. You can program up to 20 tracks.
4Press ^ to start program play.
To cancel Program Play
Press PLAY MODE until “PGM” disappears in the
display.
To check the order of tracks before play (CFD-Z120/
Z130 only)
Press DISPLAY/ENTER.
Every time you press the button, the track number
appears in the programed order.
To change the current program
Press p once if the CD is stopped and twice if the CD
is playing. The current program will be erased. Then
create a newprogram following the programing
procedure.
Playing order
Programed track
Tips
•CFD-Z120/Z130 only:
You can select the track
on the remote control.
Press the number
buttons for the track
instead of pressing
+/= and
DISPLAY/ENTER.
• You can play the same
program again, since
the program is saved
until you open the CD
compartment or switch
FUNCTION.
• The current program
will be erased if you
switch FUNCTION or
open the CD
compartment.
• You can record your
own program. After
you’ve created the
program, insert a blank
tape and press r to
start recording.
DISPLAY/ENTER PLAY MODE ^