The CD Player
CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6
15
The CD Player
Creating yourown program(Program Play)
You can make a program of up to 20
tracks in the order you want them to be
played.
1Press CD.
“Cd” appears in the display.
2Press PLAY MODE until “PGM” appears in the
display.
3Press AMS/SEARCH =or + then press
DISPLAY/ENTER for the tracks you want to
program in the order you want. You can program
up to 20 tracks.
4Press ^ to start program play.
To cancel Program Play
Press PLAY MODE until “PGM” disappears from the
display.
To check the order of tracks before play
Press DISPLAY/ENTER.
Every time you press the button, the track number
appears in the programed order.
To change the current program
Press p once if the CD is stopped and twice if the CD
is playing. The current program will be erased. Then
create a new program following the programing
procedure.
Tips
• When using the remote
(CFD-ZW160/ZW200
only), you can select
the track by pressing
the number buttons
instead of AMS/
SEARCH =/+
and DISPLAY/ENTER.
• You can play the same
program again, since
the program is saved
until you open the disc
compartment.
• You can record your
own program. After
you’ve created the
program, insert a blank
tape into deck B and
press r on deck B to
start recording.
Programed track
Playing order
=/+PLAY MODE ^CD