Load a CD and load a recordable tape.
Recording a CD by specifying track order
— Program Edit

1

2 Program CD tracks following step 1 to 5 in “Programing CD tracks” on page 10.
3 Press CD SYNC.

The tape deck stands by to record. The CD player stands by for playback.

4 Press TUNER MEMORY/DIRECTION

repeatedly to select gto record on one side. Select h(or j) to record on both sides.

5 Press REC PAUSE/START.

Recording starts.

Tip

To check the required tape length for recording a CD, press EDIT until “ EDIT” flashes after you have loaded a CD and pressed FUNCTION repeatedly until “ CD” appeared. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively (Tape Select Edit).

Note

You cannot use Tape Select Edit for discs containing over 20 tracks.

Timer-recording radio

programs

To timer-record, set the clock (see “ Setting the clock” on page 8).

1 Press CLOCK/TIMER SET on the remote.

“SET” appears for a second and then

“DAILY” appears.

2 Press . or > on the remote to select “REC”, then press ENTER.

“ON TIME” appears and the hour indication flashes.

3 Set the time to start recording.

Press . or >on the remote to set the hour, then press ENTER.

The minute indication flashes.

Press . or >on the remote to set the minute, then press ENTER.

4 Set the time to stop recording following the procedure in step 3.
5 Insert a recordable tape.

Recording starts from the top side. Insert a tape with the side you want to record on facing up.

6 Tune in the radio station (see “Listening to the radio” on page 13).
7 Press ?/1 to turn off the system.
Continued
Tape

17GB