Timer
Falling asleep to music
— Sleep Timer
You can set the system to turn off after a certain time, so that you can fall asleep to music.
Press SLEEP on the remote.
Each time you press the button, the minute display (the
AUTO* t 90min t 80min t … t 10min tOFF
*The system automatically turns off after the current CD or tape finishes playing (up to 100 minutes). When the function is TUNER, the system turns off after 100 minutes.
To | Press |
|
|
Check the | SLEEP on the remote once. |
remaining time** |
|
|
|
Change the time | SLEEP on the remote repeatedly to |
to turn off | select the time you want. |
|
|
Cancel the Sleep | SLEEP on the remote repeatedly |
Timer function | until “ OFF” appears. |
|
|
**You cannot check the remaining time if you set to “ AUTO” .
Waking up to music
— Daily Timer
You can wake up to music at a preset time. Make sure you have set the clock (see “ Setting the clock” on page 8).
1 Prepare the sound source you want to play.
•CD: Place a CD. To start from a specific track, make a program (see
“Programing CD tracks” on page 10).
•Tape: Insert a tape.
•Radio: Tune in a station (see
“Listening to the radio” on page 13).
2 Press VOL + or – on the remote to adjust the volume.
3 Press CLOCK/TIMER SET on the remote.
“SET” appears for a second and then
“DAILY” appears.
4 Press ENTER.
“ON TIME” appears and the hour indication flashes.
5 Set the time to start playing.
Press . or >on the remote to set the hour, then press ENTER.
The minute indication flashes.
Press . or >on the remote to set the minute, then press ENTER.
6 Set the time to stop playing following the procedure in step 5.
7 Press .or >on the remote to select the desired sound source.
The indication changes as follows:
tTUNER y CD PLAY T t TAPET