Turn on the system.
Setting the clock
1
2 Press CLOCK/TIMER SET on the remote.“CLOCK” appears.
3 Press .or >on the remote to set the hour.4 Press ENTER.The minute indication flashes.
5 Press .or >on the remote to set the minute.6 Press ENTER.The clock starts working.
Tip
If you make a mistake while setting the clock, press x, then start over from step 2.
To adjust the clock1Press CLOCK/TIMER SET on the remote.
2Press .or >on the remote to select “CLOCK”, then press ENTER.
3Do the same procedures as step 3 to 6 above.
Note
You cannot set the clock in the Power Saving Mode.
CD
Loading a CD
1 Press Z.The disc tray opens.
2 Place a CD with the label side up on thedisc tray.When you play a CD single (8 cm CD), place it on the inner circle of the tray.
3 Press Zagain to close the disc tray.8GB