Recording to a tape
— CD Synchro Recording/Recording Manually/Program Edit
You can record from a CD or radio (or connected components). You can use TYPE I (normal) tapes. The recording level is adjusted automatically.
Steps | Recording from a CD | Recording from a CD (or a connected |
| (CD Synchro Recording) | component) /radio manually |
|
|
|
1 | Load a recordable tape. |
|
|
|
|
2 | Press FUNCTION repeatedly to | Press FUNCTION repeatedly to select the |
| select “CD”. | desired source to record. |
|
| |
|
|
|
3 | Load the CD you want to record. | Load the CD (or other audio source), or |
|
| tune in the station you want to record. |
|
|
|
4 | Press CD SYNC. | Press REC PAUSE/START. |
| The tape deck stands by for recording. |
|
| When you want to record on the bottom side, press TAPE nN. | |
|
|
|
5 | Press TUNER MEMORY/DIRECTION repeatedly to select gto record on one | |
| side. Select h(or j) to record on both sides. | |
|
|
|
6 | Press REC PAUSE/START. | Press REC PAUSE/START, and then start |
|
| playing the desired source. |
|
|
|
To stop recording
Press x.
Note
You cannot listen to other sources while recording.
Tips
•When you record on both sides, be sure to start from the top side. If you start from the bottom side, recording stops at the end of the bottom side.
•For recording from the radio:
If noise is heard while recording from the radio, move the respective antenna to reduce the noise.