Sony CMT-CP2W/CP2WA Recording from the radio, Operations Basic, To tune in a non-presetradio station

2 Press TUNER BAND to select FM or AM.

3 Press TUNING MODE repeatedly until “PRESET” appears.

4 Press TUNER +/– repeatedly to display the preset number of the desired station.

PRESET

STEREO

3FM1005TUNED

MHz

Preset number	Frequency


To	Do this

Turn off the radio	Press ?/1.

Adjust the volume	Turn VOLUME.

To tune in a non-preset radio station

In step 3, press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear, then press TUNER +/– repeatedly to tune in the desired station (Manual Tuning).

Tips

•If you press TUNER BAND when the power is off, the system automatically turns on and tunes in the station last received (One Touch Play).

•To switch to the radio while listening to another source, press TUNER BAND (Automatic Source Selection).

•If there is static during an FM broadcast, press STEREO/MONO on the remote until “MONO” appears. After “MONO” scrolls across the display, the frequency will appear. The broadcast will no longer be in stereo, but the reception will improve. Press this button again to restore the broadcast to stereo.

•To improve the reception, adjust the supplied antennas or connect an external antenna (see “Connecting external antennas” on page 9).

Recording from the radio

Do the procedure below to tune in a preset station (see page 12) and record from the radio to a tape. Both Type I (normal) and Type II (CrO2) tapes can be used.

?/1		TAPE B nN
?/1	8 5 6 TAPE B x
(Power)	8 5 6 TAPE B x

b B	x		b B	x
m	M	X z	m	M

–

u x

. >

m M

1 2 3 4

DOLBY NR

continued

Operations Basic