Resetting the system

1Disconnect the power cord from the wall outlet.

2Press ?/1 down and connect the power cord to the wall outlet again (CMT-CP2W)/press TAPE A x and ?/1 down, and connect the power cord to the wall outlet again (CMT-CP2WA).

The system is reset to the factory settings. All previous settings such as the preset stations, clock, and timers are cleared and must be set again.

Specifications

Amplifier sectionFor the U.S. modelAUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

With 6-ohm loads both channels driven, from 70 - 20,000 Hz; rated 29 watts per channel minimum RMS power, with no more than 0.9% total harmonic distortion from 250 milliwatts to rated output.

North American model:

Continuous RMS power output (reference): 35 + 35 W

(6 ohms at 1 kHz, 10% THD)

Total harmonic distortion less than 0.07% (6 ohms at 1 kHz, 28 W)

European model:

DIN power output (rated): 30 + 30 W

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference): 35 + 35 W

(6 ohms at 1 kHz, 10% THD)

Music power output (reference): 130 W

Other models:

The following measured at 230 V AC, 60 Hz

DIN power output (rated): 30 + 30 W

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference): 35 + 35 W

(6 ohms at 1 kHz, 10% THD)

The following measured at 220 V AC, 60 Hz

DIN power output (rated):

28 + 28 W

 

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference):

 

33 + 33 W

 

(6 ohms at 1 kHz, 10% THD)

Inputs

 

MD IN (phono jacks):

Sensitivity 500 mV, impedance

 

47 kilohms

VIDEO IN (phono jacks): Sensitivity 250 mV, impedance 47 kilohms

Outputs

LINE OUT (phono jacks): Sensitivity 250 mV, impedance

1kilohm

OPTICAL DIGITAL OUT CD:

Optical

PHONES (stereo phone jack):

Accepts headphones with an impedance of 8 ohms or more

SPEAKER:

Active speaker system, 6 ohms

Information Additional

continued 31