status and error messages
Error Messages
This section provides a description of error messages that indicate possible printer problems. Note that these errors are warnings only, and do not cause the print job to be lost. Once the corrective action has been taken, printing will resume.
| Message | Problem | Corrective Action |
|
|
|
|
|
|
|
|
01 | CLOSE THE | The printer cover is | Close the cover. |
COVER | open. |
| |
| LOAD PAPER | Printer is out of paper. | Load paper. Refer to page |
02 | |||
|
|
| 9. |
|
|
|
|
03 | ADD TONER AND | Printer is out of toner. | Add toner and check waste |
CHK WASTE BOTTLE |
| toner bottle level. Refer to | |
|
|
| page 24. |
|
|
|
|
04 | INSTALL TONER | Toner waste bottle is | Install or reseat toner waste |
CUP | not installed or not | bottle. | |
|
| detected. |
|
|
|
|
|
05 | INSTALL OPC | The OPC drum unit is | Install or reseat the OPC |
DRUM | not installed or not | drum unit. | |
|
| detected. |
|
|
|
|
|
06 | CLEAR JAM AT | Entry jam sensor is on. | Clear the paper jam. Refer |
FUSER INPUT |
| to page 13. | |
|
|
|
|
07 | CLEAR JAM AT | Exit jam sensor is on. | Clear the paper jam. Refer |
FUSER EXIT |
| to page 14. | |
|
|
|
|
08 | CLEAR JAM NEAR | Jam occurred in paper | Clear the paper jam. Refer |
TOF LEVER | path. | to page 15. | |
O9 CHECK TOF | Top of form sensor |
| |
Inspect top of form sensor | |||
LEVER | malfunction. | lever and call service if | |
|
|
| necessary. |
|
|
|
|
19 | PAPER CTL ERR | A paper motion error | Burst paper at tractors and |
Reload Paper | has been detected. | reload paper. Refer to page | |
|
|
| 9. |
|
|
| |
34 REPLACE OPC | The OPC drum unit has | Replace the OPC drum unit. | |
DRUM Call Service | exceeded its life of |
| |
|
| 30,000 printed pages. |
|
|
|
|
|
Operator's Guide | 35 |
