replacing printer consumables
Fuser Cleaner Felt
The fuser cleaner felt should be replaced each time a new toner bottle is opened, except when replacing starter toner. The cleaner felt should also be replaced when toner has built up on the felt and begins to flake off.
Be sure to monitor print quality and condition of the cleaner felt. Replace the fuser cleaner felt if print quality deteriorates and caked toner is found on the cleaner felt.
warning
The fuser operates at extremely high temperatures. The fuser and fuser cleaner felt may be very hot. Use caution when performing this procedure.
Refer to the adjacent figure and perform these steps:
1Raise the top of the printer by
firmly pressing the button on the left of the front panel.
2Open the fuser cleaner felt cover. This cover is hinged and will not be removed.
3Remove the old cleaner felt by
lifting it straight up and out the top of the fuser.
4Place the new fuser cleaner felt in the top of the fuser and close the fuser cleaner felt cover.
Fuser Cleaner Felt
Fuser Cleaner Felt Cover (shown in the open position)
5Close the printer cover.
Operator's Guide | 27 |
