replacing printer consumables
5Tap the toner bottle several times to loosen toner.
6Close the developer unit cover. Press until you hear a ªclickº which indicates that the developer unit is closed completely.
note
It is not necessary to replace the waste toner bottle or fuser felt if the toner that was last added was toner from a starter toner bottle.
caution
Failure to replace the waste toner bottle, after using a standard toner bottle, can cause a toner overflow, requiring a service call to properly clean the printer.
7Replace waste toner bottle and fuser felt if it is 2/3 full, or more.
8Close the printer top cover.
note
Some software stops communicating with the printer if the printer is offline for more than two minutes. In this case, you may need to restart your print job.
26 | Operator's Guide |
